© 2005 directed electronics—all rights reserved
23
npc on/off
Nuisance Prevention
®
Circuitry (NPC
®
) stops repeated triggering of the same zone. If
one zone is triggered three times in one hour, that zone is bypassed for one hour,
starting from the time of the third trigger. During that hour, if the system detects a trig-
ger on that zone again, the system resets the one hour timer. If one hour passes and
the zone has not triggered again, the zone is activated and can trigger the system
again. NPC
®
monitors sensor inputs and the door trigger, but does not bypass the
ignition trigger at any time. If NPC
®
is turned off, the system will respond to repeated
triggers on the sensor inputs and will do so indefinitely. Some states have laws regu-
lating how many times a security system can trigger before it is considered a nuisance
and the vehicle is towed away.
remote valet - on/off
z
On: The alarm can be put into Valet mode with the remote control.
z
Off: The alarm cannot be put into Valet mode with the remote control.
reset all features to factory settings
z
All system settings (except PIN and remote programming) in the User
Programming grid will be reset to their default factory setting as indicated in
bold lettering. No installer programmable features will be changed. The Multiple
Event Total recall memory is also cleared.
z
Press the arm/disarm button of the TX; the siren will chirp twice as confirmation.
user selectable features descriptions - column three
The features in this column pertain to programming individual transmitter channels in
custom configurations. Following is an explanation of the features. Program the indi-
vidual transmitter channels, referring to note #2 in the
Programming Notes
section.
arm/disarm only
z
The remote control channel programmed into this feature will arm/disarm the
system only.
NNOOTTEE::
When programming a new remote control to custom configuration a channel
must first be programmed to this feature before programming the remaining channels.
accessory (-) output
z
The transmitter channel programmed into this feature will activate the accessory
output.
(24 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels